Handgun Tactical Rifle Hunting Rifle Hunting Rifle Handgun Tactical Rifle Handgun Tactical Rifle

Rifles: Barrett

New! Barrett REC7 14958 Gen 2 Flyweight – 5.56 NATO/223 Rem 16″ 30+1 Rail – Tungsten Grey Color – Soft Case
See full-sized image.

New! Barrett REC7 14958 Gen 2 Flyweight – 5.56 NATO/223 Rem 16″ 30+1 Rail – Tungsten Grey Color – Soft Case

Status: In Stock as of August 17, 2017

Category: Rifles
Brand: Barrett
Keywords: , , , ,

Manufacturer SKU: 14958 (Manufacturer Link)
Caliber: 223 Rem / 5.56 NATO
Number of rounds: 30+1
Barrel length: 16"
Weight: 6 lbs.
Features: PISTON. Gen 2 Barrett Specs.
Recommended Scope: Trijicon ACOG RMR. Nightforce 1-4x24 or Steiner 1-4x24 5.56
Condition: New In Grey Soft Case and Box
Cash Price: $1,812
Shipping Cost: $30 Shipping by UPS Air

Contact us about this product.

NOTE FROM THE SCOPESMITH ABOUT THE “FLYWEIGHT” VERSION OF THE REC7: Barrett had a wonderful idea of stripping their top-of-the-line REC7 Gen 2 from third party accessories that bulked the price and the customer may not want: Geissele SA trigger, sights, muzzle break and the fancy Barrett Soft Case (a more economic soft case is provided). So, if you want a “finished” REC7 you should purchase the regular ~$2,300 version but if you want a 100% REC7 but have your own ideas about trigger, sights, optics or muzzle device/suppressor adapter THIS IS YOUR UNIT FOR $450 LESS!

ABOUT THE REC7:

Arguably the best Combat AR-15. Compact, accurate and completely trustworthy, the REC7 is designed specifically for situations in which there’s no room for error. Styled in the familiar AR configuration, it’s a no-nonsense rifle you can trust with anything—including your life.

This tough-as-nails rifle was designed specifically to answer the call for a low-maintenance, enhanced reliability carbine.

The REC7 rifle’s dependability stems largely from its innovative operating system. Using a minimum number of parts, the piston system separates heat and powder residue from the bolt carrier and trigger assembly. The rifle runs cool and clean, reducing maintenance requirements and increasing endurance.

The patented chrome-lined fluted gas block prevents excessive carbon buildup from operation under adverse conditions. The one-piece 17-4 stainless piston transfers energy to the anti-tilt bolt carrier. Machined from a monolithic block of 8620 steel, the carrier features an integral piston strike face.

The Barrett Enhanced Bolt is made from high-strength 9310 steel. The bolt is designed specifically for use in the piston operated REC7, not just adapted from a direct gas bolt.  The bolt’s gas-ring-free design is easy to clean. Reinforced at critical areas, every bolt is proofed and magnetic-particle inspected to guarantee reliable performance.

At the heart of the operating system is a nitrided, two-position, forward-venting gas plug that retains the piston. The piston can be accessed through the front of the gas block without removing the handguard so optical sights or laser devices do not need to be zeroed after routine maintenance.

The REC7 rifle’s forged 7075 aluminum upper and lower receivers are Type 3 hardcoat anodized. The lower houses an ultra-dependable single-stage trigger. The upper supports a free-floated, hammer-forged, chrome-lined barrel with M4 feed ramps machined into the receiver and the barrel extension. A mil-spec A2 flash hider protects the muzzle.

The REC7 is everything you’d expect from a Barrett rifle, and then some! (NOTE: Video shows a FDE version, our unit comes in the striking Tungsten Grey color!)

 

 

BARRETT M15984-S REC7 DI Direct Impingement 223/556 – 16 Inches – 30+1 Barrett Keymod Handguard – Barrett Sights – Burnt Bronze
See full-sized image.

BARRETT M15984-S REC7 DI Direct Impingement 223/556 – 16 Inches – 30+1 Barrett Keymod Handguard – Barrett Sights – Burnt Bronze

Status: In Stock as of August 17, 2017

Category: Rifles
Brand: Barrett
Keywords: , , , , , , ,

Manufacturer SKU: M15984-S
Caliber: 223 Rem and 556 NATO
Number of rounds: 30+1
Barrel length: 16"
Weight: 6.2 lbs.
Features: Direct Imping. Barrett Keymode Rail. Bronze. Barrett Sights
Cash Price: $1,587
Shipping Cost: $30 Shipping by UPS Air

Contact us about this product.

BARRETT M15397-S REC7 DI Direct Impingement 223/556 – 16 Inches – 30+1 Barrett Keymod Handguard – Barrett Sights – FDE
See full-sized image.

BARRETT M15397-S REC7 DI Direct Impingement 223/556 – 16 Inches – 30+1 Barrett Keymod Handguard – Barrett Sights – FDE

Status: In Stock as of August 17, 2017

Category: Rifles
Brand: Barrett
Keywords: , , , , , , ,

Manufacturer SKU: M15397-S
Caliber: 223 Rem / 5.56 NATO
Number of rounds: 30+1
Barrel length: 16"
Weight: 6.2 lbs.
Features: Direct Impg. Barrett Keymode Rail. FDE. Barrett Sights
Condition: New In Box
Cash Price: $1,587
Shipping Cost: $30 Shipping by UPS Air

Contact us about this product.

After years of raising the bar on longrange shooting with their 50 caliber, Barrett has now created a next generation AR. They call it the REC7 DI, and, while incredibly light, it carries some truly weighty attributes. A highly customizable direct impingement rifle, the REC7 DI can be adapted to your specific preferences.

What’s more, in true Barrett tradition, this rifle is hand-built and intensely precise for accuracy that’s truly one of a kind. Shoot it thousands of times, drag it through the mud, submerge it in the water; whatever the case, it’s built to be reliable for years.

The REC7 DI is a lightweight, direct impinged operated semi-automatic rifle equipped with a match grade stainless steel barrel, Magpul MOE® furniture, Barrett designed 15” KeyMod handguard, Bravo Company Gunfighter charging handle, muzzle device, ALG Defense ACT trigger and the excellent Barrett solid Alloy Sights..

The REC7 from Barrett. Shoots holes in every excuse.

This is the Model 15397-S in FDE Color!

Also available in BLACK, GREY and BURNT BRONZE!

BARRETT M15394-S REC7 DI Direct Impingement 223/556 – 16 Inches – 30+1 Barrett Keymod Handguard – Barrett Sights – Black
See full-sized image.

BARRETT M15394-S REC7 DI Direct Impingement 223/556 – 16 Inches – 30+1 Barrett Keymod Handguard – Barrett Sights – Black

Status: In Stock as of August 17, 2017

Category: Rifles
Brand: Barrett
Keywords: , , , , , ,

Manufacturer SKU: M15394-S (Manufacturer Link)
Caliber: 223 Rem / 5.56 NATO
Number of rounds: 30+1
Barrel length: 16"
Weight: 6.2 lbs.
Features: Direct Impg. Barrett Keymode Rail. Barrett Sights
Condition: New In Box
Cash Price: $1,567
Shipping Cost: $30 Shipping by UPS Air

Contact us about this product.

After years of raising the bar on longrange shooting with their 50 caliber, Barrett has now created a next generation AR. They call it the REC7 DI, and, while incredibly light, it carries some truly weighty attributes. A highly customizable direct impingement rifle, the REC7 DI can be adapted to your specific preferences.

What’s more, in true Barrett tradition, this rifle is hand-built and intensely precise for accuracy that’s truly one of a kind. Shoot it thousands of times, drag it through the mud, submerge it in the water; whatever the case, it’s built to be reliable for years.

The REC7 DI is a lightweight, direct impinged operated semi-automatic rifle equipped with a match grade stainless steel barrel, Magpul MOE® furniture, Barrett designed 15” KeyMod handguard, Bravo Company Gunfighter charging handle, muzzle device, ALG Defense ACT trigger and the excellent Barrett solid Alloy Sights..

The REC7 from Barrett. Shoots holes in every excuse.

This is the Model 15394-S in Black!

Also available in TUNGSTEN GREY, BURNT BRONZE and FDE!

 

Back in Stock! Barrett REC7 Gen 2 – 5.56 NATO 16″ 30+1 Rail – Soft Case – 2 Mags

Status: In Stock as of August 17, 2017

Category: Rifles
Brand: Barrett
Keywords: , ,

Manufacturer SKU: 13952 (Manufacturer Link)
Caliber: 223 Rem / 5.56 NATO
Number of rounds: 30+1
Barrel length: 16"
Weight: 7.2 lbs.
Features: PISTON. Gen 2 Barrett Specs.
Condition: New In Box
Cash Price: $2254
Shipping Cost: $30 Shipping by UPS Air

Contact us about this product.

Compact, accurate and completely trustworthy, the REC7 is designed specifically for situations in which there’s no room for error. Styled in the familiar AR configuration, it’s a no-nonsense rifle you can trust with anything—including your life.

This tough-as-nails rifle was designed specifically to answer the call for a low-maintenance, enhanced reliability carbine.

The REC7 rifle’s dependability stems largely from its innovative operating system. Using a minimum number of parts, the piston system separates heat and powder residue from the bolt carrier and trigger assembly. The rifle runs cool and clean, reducing maintenance requirements and increasing endurance.

The patented chrome-lined fluted gas block prevents excessive carbon buildup from operation under adverse conditions. The one-piece 17-4 stainless piston transfers energy to the anti-tilt bolt carrier. Machined from a monolithic block of 8620 steel, the carrier features an integral piston strike face.

The Barrett Enhanced Bolt is made from high-strength 9310 steel. The bolt is designed specifically for use in the piston operated REC7, not just adapted from a direct gas bolt.  The bolt’s gas-ring-free design is easy to clean. Reinforced at critical areas, every bolt is proofed and magnetic-particle inspected to guarantee reliable performance.

At the heart of the operating system is a nitrided, two-position, forward-venting gas plug that retains the piston. The piston can be accessed through the front of the gas block without removing the handguard so optical sights or laser devices do not need to be zeroed after routine maintenance.

The REC7 rifle’s forged 7075 aluminum upper and lower receivers are Type 3 hardcoat anodized. The lower houses an ultra-dependable single-stage trigger. The upper supports a free-floated, hammer-forged, chrome-lined barrel with M4 feed ramps machined into the receiver and the barrel extension. A mil-spec A2 flash hider protects the muzzle.

In 5.56 NATO and 6.8 SPC, the REC7 is everything you’d expect from a Barrett rifle, and then some.

REC 7

New! Barrett REC7 Gen 2 Flyweight – 5.56 NATO/223 Rem 16″ 30+1 Rail – FDE Color – Soft Case
See full-sized image.

New! Barrett REC7 Gen 2 Flyweight – 5.56 NATO/223 Rem 16″ 30+1 Rail – FDE Color – Soft Case

Status: In Stock as of August 17, 2017

Category: Rifles
Brand: Barrett
Keywords: , , , ,

Manufacturer SKU: 14959 (Manufacturer Link)
Caliber: 223 Rem / 5.56 NATO
Number of rounds: 30+1
Barrel length: 16"
Weight: 6.0 lbs.
Features: PISTON. Gen 2 Barrett Specs
Recommended Scope: Trijicon ACOG RMR. Nightforce 1-4x24 or Steiner 1-4x24 5.56
Condition: New In Grey Soft Case and Box
Cash Price: $1,812
Shipping Cost: $30 Shipping by UPS Air

Contact us about this product.

NOTE FROM THE SCOPESMITH ABOUT THE “FLYWEIGHT” VERSION OF THE REC7: Barrett had a wonderful idea of stripping their top-of-the-line REC7 Gen 2 from third party accessories that bulked the price and the customer may not want: Geissele SA trigger, sights, muzzle break and the fancy Barrett Soft Case (a more economic soft case is provided). So, if you want a “finished” REC7 you should purchase the regular ~$2,300 version but if you want a 100% REC7 but have your own ideas about trigger, sights, optics or muzzle device/suppressor adapter THIS IS YOUR UNIT FOR $450 LESS!

ABOUT THE REC7:

Arguably the best Combat AR-15. Compact, accurate and completely trustworthy, the REC7 is designed specifically for situations in which there’s no room for error. Styled in the familiar AR configuration, it’s a no-nonsense rifle you can trust with anything—including your life.

This tough-as-nails rifle was designed specifically to answer the call for a low-maintenance, enhanced reliability carbine.

The REC7 rifle’s dependability stems largely from its innovative operating system. Using a minimum number of parts, the piston system separates heat and powder residue from the bolt carrier and trigger assembly. The rifle runs cool and clean, reducing maintenance requirements and increasing endurance.

The patented chrome-lined fluted gas block prevents excessive carbon buildup from operation under adverse conditions. The one-piece 17-4 stainless piston transfers energy to the anti-tilt bolt carrier. Machined from a monolithic block of 8620 steel, the carrier features an integral piston strike face.

The Barrett Enhanced Bolt is made from high-strength 9310 steel. The bolt is designed specifically for use in the piston operated REC7, not just adapted from a direct gas bolt.  The bolt’s gas-ring-free design is easy to clean. Reinforced at critical areas, every bolt is proofed and magnetic-particle inspected to guarantee reliable performance.

At the heart of the operating system is a nitrided, two-position, forward-venting gas plug that retains the piston. The piston can be accessed through the front of the gas block without removing the handguard so optical sights or laser devices do not need to be zeroed after routine maintenance.

The REC7 rifle’s forged 7075 aluminum upper and lower receivers are Type 3 hardcoat anodized. The lower houses an ultra-dependable single-stage trigger. The upper supports a free-floated, hammer-forged, chrome-lined barrel with M4 feed ramps machined into the receiver and the barrel extension. A mil-spec A2 flash hider protects the muzzle.

The REC7 is everything you’d expect from a Barrett rifle, and then some!

 

 

Barrett MRAD SYSTEM 24.5″ Stainless Fluted Barrel 338 Lapua 10rd – Multi Role Brown
See full-sized image.

Barrett MRAD SYSTEM 24.5″ Stainless Fluted Barrel 338 Lapua 10rd – Multi Role Brown

Status: In Stock as of August 17, 2017

Category: Rifles
Brand: Barrett
Keywords: , ,

Manufacturer SKU: M12604
Caliber: 338 Lapua Magnum
Number of rounds: 10+1
Barrel length: 24.5"
Weight: 14 lbs.
Features: Folding adjustable stock. Rail. Muzzebreak. Multi-Caliber.
Condition: New In Pelican Case
Cash Price: Please Call

Contact us about this product.

The MRAD rifle’s user-changeable barrel system is just one example of this hardworking gun’s modularity. The precision grade barrel can be removed by simply loosening two bolts using a standard Torx wrench. Besides reducing maintenance and logistical burdens, this unique design allows for user level caliber interchangeability and serviceability with the MRAD rifle’s barrel kits.

The MRAD also boasts Barrett’s fully adjustable match-grade trigger module, which is user accessible. The thumb-operated safety can be configured for left or right hand operation. The ambidextrous magazine release can be used intuitively while retaining a firing grip and cheek weld.

Integrated into the MRAD rifle’s 7000 series aluminum upper receiver is a 21.75 inch M1913 rail with 30 MOA taper. The forward receiver is drilled and tapped for accessory rails to be mounted at the 3, 6 and 9 o’clock positions.

The MRAD stock is foldable for enhanced portability yet locks in as solid as a fixed-stock rifle, creating a rigid platform for consistent firing. During transport the stock folds and locks onto the bolt handle maintaining the same rifle width whether folded or extended.

Made of a temperature-resistant polymer, the adjustable cheek piece also offers a consistent rifle-to-user contact point. The rifle’s length of pull can be set to five different positions with the push of a single button.

From its quick-detach sling mounts to the Barrett Multi-Role Brown color that blends into any environment – every detail of the MRAD has been carefully designed to create one thing: a high-performance rifle you can truly make your own.

This is a manufacturer’s video demonstrating the capabilities of the MRAD:

Barrett MRAD SYSTEM 20″ Stainless Fluted Barrel 338 Lapua 10rd – Multi Role Brown
See full-sized image.

Barrett MRAD SYSTEM 20″ Stainless Fluted Barrel 338 Lapua 10rd – Multi Role Brown

Status: In Stock as of August 17, 2017

Category: Rifles
Brand: Barrett
Keywords: , ,

Manufacturer SKU: M13045 (Manufacturer Link)
Caliber: 338 Lapua Magnum
Number of rounds: 10
Barrel length: 20"
Weight: 13.25 lbs.
Features: Folding Stock. Full Rail. Muzzlebreak, Multi-Caliber.
Condition: New in Pelican Case
Cash Price: Please Call.

Contact us about this product.

The “backpack ready” version of this incredible rifle the MRAD rifle’s user-changeable barrel system is just one example of this hardworking gun’s modularity. The precision grade barrel can be removed by simply loosening two bolts using a standard Torx wrench. Besides reducing maintenance and logistical burdens, this unique design allows for user level caliber interchangeability and serviceability with the MRAD rifle’s barrel kits.

The MRAD also boasts Barrett’s fully adjustable match-grade trigger module, which is user accessible. The thumb-operated safety can be configured for left or right hand operation. The ambidextrous magazine release can be used intuitively while retaining a firing grip and cheek weld.

Integrated into the MRAD rifle’s 7000 series aluminum upper receiver is a 21.75 inch M1913 rail with 30 MOA taper. The forward receiver is drilled and tapped for accessory rails to be mounted at the 3, 6 and 9 o’clock positions.

The MRAD stock is foldable for enhanced portability yet locks in as solid as a fixed-stock rifle, creating a rigid platform for consistent firing. During transport the stock folds and locks onto the bolt handle maintaining the same rifle width whether folded or extended.

Made of a temperature-resistant polymer, the adjustable cheek piece also offers a consistent rifle-to-user contact point. The rifle’s length of pull can be set to five different positions with the push of a single button.

From its quick-detach sling mounts to the Barrett Multi-Role Brown color that blends into any environment – every detail of the MRAD has been carefully designed to create one thing: a high-performance rifle you can truly make your own.

This is a manufacturer’s video demonstrating the capabilities of the MRAD: